Hydraulic: 1 HP., 1.3 G.P.M. Hydraulic Deck and Lip 25,000; 30,000; 35,000; 40,000; and 45,000 lb. Dynamic Capacities	6', 6' 6", and 7' Widths 6',8', and 10' Lengths (Custom Sizes Available)

Rugged PIONEER Levelers Keep Working For You. Fully hydraulic HP Series Levelers offer solid-state proximity sensors to control deck and lip functions, including automatic return to safe cross traffic position when truck departs. Lip hinge features full-width, cold roll CF 1045 steel pin and seamless tubing for exceptionally heavy loads. Lip keepers serve as night locks for security and provide safe cross-traffic support when unit is stored. Warranty (HP Series) PIONEER provides a 5-year warranty on structural members and proximity sensors. A 1-year warranty is provided on motor pump and miscellaneous parts (including materials, labor and freight). Guarantee Pioneer will provide our standard warranty or match any documented competitive warranty in the industry for comparable models. There is no fine print. We build it and we guarantee it!

Exclusive PIONEER Base Frame Support Struts make our Hydraulic Series the strongest and safest Levelers in the industry today! The HP's hydraulic system features a 4" Main Cylinder with a 2" ram. Inline Safety Stop guards against free-fall in the event of premature truck departure. PIONEER's solid steel Structural "C" Channel offers matchless deck support - providing a 39% greater resistance to elastic bending moments than other industry designs. Solid-state Proximity Sensors (HP Only) control all Leveler functions, including automatic return to cross-traffic position upon truck departure.     Metric Specifications - 11,340; 13,608; 15,878; 18,144 and 20,412 kg Dynamic Capacities - 1,829; 1,981 and 2,133 mm Widths - 1,829; 2,438 and 3,048 Lengths

All PIONEER Levelers meet or exceed the performance requirements of CS202-56, O.S.H.A., and A.N.S.I. MH14.1-1984

Durability

• Deck and lip are constructed of 55,000 lb. Minimum Yield Steel Tread Plate.
• Deck support beams are engineered with a Solid Steel Structural "C" Channel, fully welded to Full-width Header Plate.
• Regenerative Main and Lip Cylinders provide dual-sided lubrication for all hydraulic seals. Main cylinder is 4" in diameter with a 2" diameter ram.
• Extra Heavy Rear Angle with Strategically Placed Gussets provides maximum structural support and frame strength.
• Continuous Hinge Design with Grease Fittings and Dock Bumpers included as standard with each unit.
• Molded Bumpers protect dock face and Leveler from truck damage.

Easy Installation

• Power is available in 1 PH. (115) or (230) volts; or 3 PH. (208), (230), or (460) volts.  All 60HZ Units.
• Custom Rear Angle is two inches wider than the Leveler, providing extra area to weld at both ends.
• Front and rear Forklift Slots provide easy access for maneuvering and installation.
• Side Ports allow unit to be suspended and lowered into pit from dock floor.

Simple Operation

• All operations are push-button controlled from a single, pre-wired Wall Mounted Remote.
• Leveler can be recycled with the truck in position, or after the truck departs by depressing the start button.
• Automatic Lip extends and locks as main cylinder raises the platform; descends upon truck departure.
• Solid-state Proximity Sensor electronically recycles the leveler when the truck departs (HP Only).
• Operating Range of 12" above and 12" below dock.

Safety

• Hydraulic system includes an Inline Safety Stop to prevent free-fall in the event the unit suddenly becomes unsupported.
• Power unit is totally enclosed, factory wired, and tested per specifications. All 60HZ units. Remote box meets N.E.M.A. 12 requirements.
• HP Series Solid-state Proximity Sensors automatically return Leveler to safe cross-traffic position when truck departs.
• Lip Keepers serve as night locks for security and provide Safe Cross-traffic Support when unit is stored. Deck tilts to a maximum of 4" from side to side, compensating for unlevel trucks.
• Full-range Toe Guards protect workers from injury during loading and unloading.
• Base Frame Support Struts, exclusive to PIONEER, transfer pull-out forces of unsupported Leveler into the floor of the pit - making this the strongest and safest Leveler on the market today!

EHP Series

• Hydraulic: 1 HP., 1 G.P.M.
• 25,000; 30,000; 35,000; 40,000; and 45,000 lb. Dynamic Capacities
• 6', 6'-6", and 7' Widths
• 6', 8', and 10' Lengths

Warranty: (EHP) PIONEER offers a 2-Year warranty on structural members. A 1-year warranty is provided on the motor pump and miscellaneous parts (including materials, labor, and freight).

Inline Safety Stop guard against free-fall in the event of premature truck departure. All PIONEER hydraulic levelers incorporate this feature as standard.