858-455-5800
Home
Shop Online
Products
Services
Customers
Picture Gallery
Request Literature
Ask the Experts
Newsletters
FAQs
Contact Us
About Us
Guaranteed Secure Shopping
|
|
|
Products: Span-Track |
|
|
Low
Profile Span-Track |
Low
Profile Span-Track nests between front and rear beams allowing
full use of vertical space in each level of rack. Installs
BETWEEN beams of ANY pallet rack. Requires NO SHELVES or intermediate
supports.
- Superior Carton Flow - Product always at pick face. No
hang-ups or dead space.
- No Tools Needed - Place hangers on beams. Add track. Nests
between front and rear beams to maximize vertical space.
- Hangers to Fit Any Beam - Available for step, structural
and formed beams. Front hanger acts as
a front end stop. Rear hanger absorbs shock of impact loading.
Both have built-in label holders.
- 7-Year Warranty means Built to Last - Galvanized steel
side channels, 3/4" diameter aluminum rollers require
No Maintenance or Replacement.
- Load Capacity up to 50# per foot
- 3' to 12' Lengths - Available in "to-the-inch"
cuts. Lengths over 10' require intermediate support (see
Bridge Hanger), or use Span-Track 3D for extra load strength.
- 6", 9", 12" and 15" Nominal Widths
- Actual width of track is 3/4" greater than nominal.
|
|
Low
Profile Span-Track with Pick Tray |
Add our Pick Tray to the front of a rack of Low Profile
to improve visibility and efficiency at the pick point in "each
picking." Installs BETWEEN beams of ANY pallet rack. Requires
NO SHELVES or intermediate supports. Pick Tray extends out from
front of Low Profile section creating a tilted facing for easy
access in "each picking."
- Superior Carton Flow - Product always at pick face. No
hang-ups or dead space.
- No Tools Needed - Place hangers on beams. Add track. Nests
between front and rear beams to maximize vertical space.
- Hangers to Fit Any Beam - Available for step, structural
and formed beams. Back of Pick Tray hangs on Bridge Hangers
on a structural beam. Front of Pick Tray is supported by
pins (supplied) inserted in uprights placed either 18"
or 24" out from front of rack.
- 7-Year Warranty means Built to Last - Span-Track's galvanized
steel side channels, 3/4" diameter aluminum rollers
require No Maintenance or Replacement. Pick Tray is all
galvanized steel.
- Load Capacity up to 50# per foot
- Pick Tray is available in 5' to 10' widths in 6 inch increments.
18" and 24" depth is standard. Custom sizes available.
Tilt adjusts from 15 to 35 degrees.
- Low Profile Span-Track comes in 3' to 12' Lengths - Available
in "to-the-inch" cuts. Lengths over 10' require
intermediate support (see Bridge Hanger), or use Span-Track
3D for extra load strength.
- 6", 9", 12" and 15" Nominal Widths
- Actual width of track is 3/4" greater than nominal.
|
|
Span-Track
3D |
Low
Profile with a 3" Deep side channel for increased load
capacity over longer, unsupported spans. Low Profile SPAN-TRACK
3D takes loads up to 50# per foot over 10 foot unsupported
spans. Installs BETWEEN beams of ANY pallet rack. Requires
NO SHELVES or intermediate supports.
- Superior Carton Flow - Product always at pick face. No
hang-ups or dead space.
- No Tools Needed - Place hangers on beams. Add track. Nests
between front and rear beams to maximize vertical space.
- Hangers to Fit Any Beam - Available for step, structural
and formed beams. Front hanger acts as a front end stop.
Rear hanger absorbs shock of impact loading. Both have built-in
label holders.
- 7-Year Warranty means Built to Last - Galvanized steel
side channels, 3/4" diameter aluminum
rollers require No Maintenance or Replacement.
- Load Capacity up to 50# per foot - even over
10' unsupported spans with Span-Track 3D's 3"
Deep side chanels.11' unsupported span hold 35# per
foot. 12' unsupported span hold 25# per foot.
- 7' to 12' Lengths - Available in "to-the-inch"
cuts.
- 9", 12" and 15" Nominal Widths - Actual
width of track is 1-1/4" greater than
nominal.
|
|
High
Profile Span-Track |
Installs on beams of any pallet rack. Sections can extend
beyond front and rear of rack for a contoured profile. Requires
NO SHELVES or intermediate supports.
- Superior Carton Flow - Product always at pick face. No
hang-ups or dead space.
- Install Flush with Beams or Overhanging - Arrange facings
to fit your needs. Create a contoured "step" effect
to optimize pick visibility and access.
- Locks to Beam, Yet Easy to Adjust - Retainer angle attached
to front and rear beam. Track fits over retainer teeth,
adjust front/back and left/right. Lock Arm at rear secures
track to retainer angle.
- Front End Stop - Track sections each have a front end
stop, a rear load impact bar, and built in label holders
at both ends.
- Knuckled End option - Track has 15° tilted front end.
Speeds and simplifies loose pick.
- 7-Year Warranty means Built to Last - Galvanized steel
side channels, 3/4" diameter, full-width aluminum rollers
require No Maintenance or Replacement.
- Load Capacity up to 50# per foot
- 3' to 12' Lengths - Available in "to-the-inch"
cuts.
- 6", 9", 12" and 15" Nominal Widths
- Actual width of track is 3/4" greater than nominal.
|
|
Deck
Profile Span-Track |
Track sections sit on front and rear beams for the absolute
easiest "drop-in" installation for single-deep racks.
DECK SPAN-TRACK drops right onto the beams of single deep pallet
rack. Requires NO SHELVES or HANGERS.
- Superior Carton Flow - Product always at pick face. No
hang-ups or dead space.
- No Tools Needed - Track drops into rack, supported by
front and rear beams.
- Fits Most Beams - "Inset" cut of side channels
at front and rear sits on beams and keeps track in its position.
- 7-Year Warranty means Built to Last - Galvanized steel
side channels, 3/4" diameter aluminum rollers require
No Maintenance or Replacement.
- Load Capacity: 50# per foot
- Lengths to fit Single Deep Rack - Comes in 3', 3'6",
4', 4'6" and 5' lengths. Built-in carton stops and
label holders at both ends.
- 9", 12" and 15" Nominal Widths - Actual
width of track is 3/4" greater than nominal.
|
|
|